KnKut SG-5 Pointed Tree Shape Carbide Burr with 1/4 in Shank, 1/2 x 1 x 2-3/4 in OAL - KK14-SG-5 Phillips 2 levels of brightness plus

2 levels of brightness plus warning/signal function

plus the peace of mind using individually tested

Input Drive Size: 1/2" Drive Shape: Square Length: 80mm Type: Die Holder Output Size: 38mm

14 in / 29 mm - 1600 Blow Per Minute 6151612100

Setting punch 315x30x14 mm is available to order online

KnKut SG-5 Pointed Tree Shape Carbide Burr with 1/4 in Shank, 1/2 x 1 x 2-3/4 in OAL - KK14-SG-5 Phillips 2 levels of brightness plusKnKut SG 5 Pointed Tree Shape Carbide Burr with 1 4 in Shank, 1 2 x 1 x 2 3 4 in OAL KK14 SG 5 KnKut Carbide Burrs (sometimes called Rotary Files) are rotary cutting tools commonly used in removing burrs from castings. The double cut allows for rapid stock removal in harder materials. The addition of the left hand flutes reduces the pulling action, allowing better operator control. It reduces the size of the chips and can be used at slower than normal