721-0123 - Actuators - 720 Series 455A514-3 1/4 inches per second motor

1/4 inches per second motor is used on the following products: 721-0112 721-0114 721-0129

with a (black) male 8-pin Packard connector

15 inches per second motor is used on the following products:

Block 5: Send + 12V DC to Retract (Do not send 12V to Block 7)

1/2 inches per second

721-0123 - Actuators - 720 Series 455A514-3 1/4 inches per second motor24VDC, 72" cable output, 0. 07 inches per second, no feedback, no mounting hardware. DETAILED INFORMATION Standard 721 Series actuator, which runs on a 24V source, with an output speed of 0. 07 an inch per second. Total stroke length is 3 inches, and this unit has a 72" Push Pull cable as its output. This system works via a 6 pole DPDT toggle switch. Terminal block pin out: Block 1: 12V + to motor (RED WIRE) Block 2: 12V to motor (BLACK WIRE) Block 3: