6914DDU NSK Sealed Deep Groove Ball Bearing 70x100x16mm Sealed da min: 23

da min: 23

J Bolt centres min: 108

truck and trailer wheel bearings

Bolt Used: M12

Support the counter-support on the housing and screw it onto the wedge spindle of the internal extractor Hold the handle of the counter-support and pull the bearing out safely by tightening the nut Retighten the tensioning nut when pulling out

6914DDU NSK Sealed Deep Groove Ball Bearing 70x100x16mm Sealed da min: 23NSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass