6834 NSK Open Deep Groove Ball Bearing 170mm inside x 215mm outside x 22mm wide Open This bearing has been used

This bearing has been used as a suspension pivot bearing by a number of bicycle brands including Trek

Pitch/Datum length Ld 2300mm

from the simplest to the most complex

can accommodate axial loads in one direction and thus locate a shaft axially in one direction

Bearing weight: 24 Kg

6834 NSK Open Deep Groove Ball Bearing 170mm inside x 215mm outside x 22mm wide Open This bearing has been usedNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass